Jul 27, 2021
The Second Centralized Controller with 4G Model update
Our 2nd Generation Centralized Controller is upadating now, new key features: 1. Ethernet Port 2. Testing ( Built-in) 3. GPRS 4. LoRa 5. 4G( Support from 2G/3G/4G) 6. Basic functions keep exactly as 1st Version. I: Description CH-CC800Smart Lighting Management Centralized Controller is independently developed by our company,which is widely used in the Smart City Street Lighting Projects, Super-highway’s Tunnels and the Industrial Lighting such as huge scale factory and warehouse Lighting System,control lighting fixtures through the man-machine interface,data acquisition and lamps Monitoring. Although the Traditional lighting fixtures have widely used in the street lighting, tunnel and high buildings, but there are still a lots of problem exit there: Lifetime, Light Attenuation, Bad Factory Environments etc. which will lead to damage the lamps,moreover, dead plate controlling method, Lighting Scene, the fault points and failure lamps only be found by when the worker inspection there, it can not provide a reliable working data to the controllers on time. For these reasons, we offer this muti-functions smart lighting Centralized Controller: Electric Energy/Data acquisition, Fault Detect,Data Process, Remote Copying Control,Loop Power Control, Dimming,Auto-Running, Temperature Collecting, Sensor Data Acquisition etc. The device has multiple interfaces, in addition to reserved Industrial Bus RS-485, RS-232, it is also equipped with Industrial Touch Screen Interactive Interface, Ethernet Communication Interface, GPRS Communication Interface, Lighting Control Interface (Power Line Carrier or LoRa Communication Channel) Communication Interface to the Loop Controller and Communication Interface with Sensors (such as Illuminance Sensors).The communication performance of the main communication interface is as follows: the communication distance of the RS-485 Industrial Bus can reach 2 km without Repeater, and the actual measurement in the tunnel can reach 1km.; A 7-level gateway can be set in the scene, and the maximum distance can reach 7km according to 1km of the gateway of each level, and the capacity of the equipment in the gateway is up to 255 units; LoRa Communication Interface, the communication distance can reach 2km without Repeater, the measured distance can reach 1km, and the communication distance can reach 10km in the case of repeater.PLC communication interface, the communication distance can reach 400m without repeater, and with repeater In this case, the communication distance can be up to 4km. II. Electrical Parameter Item Rating Range Maximum Loading Lamp Qty. 400 units(extend to1000 units, option for industry lighting) Working Voltage 120/240V±20%( Max.<420V) Working Frequency 50Hz - 60Hz SwitchingOutput 8A(MAX), Over-current Capacity (resistive load) Insulation withstand voltage 4KV, (RS485 interface and power supply) Communication Channels PLC, LoRa, or Hybrid of PLC + LoRa Maximum Consumption Power < 3 watts Remo...
View More