Our 2nd Generation Centralized Controller is upadating now, new key features:
1. Ethernet Port
2. Testing ( Built-in)
3. GPRS
4. LoRa
5. 4G( Support from 2G/3G/4G)
6. Basic functions keep exactly as 1st Version.
I: Description
CH-CC800Smart Lighting Management Centralized Controller is independently developed by our company,which is widely used in the Smart City Street Lighting Projects, Super-highway’s Tunnels and the Industrial Lighting such as huge scale factory and warehouse Lighting System,control lighting fixtures through the man-machine interface,data acquisition and lamps Monitoring.
Although the Traditional lighting fixtures have widely used in the street lighting, tunnel and high buildings, but there are still a lots of problem exit there: Lifetime, Light Attenuation, Bad Factory Environments etc. which will lead to damage the lamps,moreover, dead plate controlling method, Lighting Scene, the fault points and failure lamps only be found by when the worker inspection there, it can not provide a reliable working data to the controllers on time. For these reasons, we offer this muti-functions smart lighting Centralized Controller: Electric Energy/Data acquisition, Fault Detect,Data Process, Remote Copying Control,Loop Power Control, Dimming,Auto-Running, Temperature Collecting, Sensor Data Acquisition etc.
The device has multiple interfaces, in addition to reserved Industrial Bus RS-485, RS-232, it is also equipped with Industrial Touch Screen Interactive Interface, Ethernet Communication Interface, GPRS Communication Interface, Lighting Control Interface (Power Line Carrier or LoRa Communication Channel) Communication Interface to the Loop Controller and Communication Interface with Sensors (such as Illuminance Sensors).The communication performance of the main communication interface is as follows: the communication distance of the RS-485 Industrial Bus can reach 2 km without Repeater, and the actual measurement in the tunnel can reach 1km.; A 7-level gateway can be set in the scene, and the maximum distance can reach 7km according to 1km of the gateway of each level, and the capacity of the equipment in the gateway is up to 255 units; LoRa Communication Interface, the communication distance can reach 2km without Repeater, the measured distance can reach 1km, and the communication distance can reach 10km in the case of repeater.PLC communication interface, the communication distance can reach 400m without repeater, and with repeater In this case, the communication distance can be up to 4km.
II. Electrical Parameter
Item |
Rating Range |
|
Maximum Loading Lamp Qty. |
400 units(extend to1000 units, option for industry lighting) |
|
Working Voltage |
120/240V±20%( Max.<420V) |
|
Working Frequency |
50Hz - 60Hz |
|
SwitchingOutput |
8A(MAX), Over-current Capacity (resistive load) |
|
Insulation withstand voltage |
4KV, (RS485 interface and power supply) |
|
Communication Channels |
PLC, LoRa, or Hybrid of PLC + LoRa |
|
Maximum Consumption Power |
< 3 watts |
|
Remote Control |
Group & Individual ON/OFF/Dimming |
|
Latitude & Longitude Switch |
Yes |
|
Lighting Sensors |
Seamless Fill brightness by Illuminance Sensor + Motion Sensor |
|
Scene Lighting Automatically |
Rainy, Cloudy, Fogs, Snowing Days Auto-adjusting |
|
Grid / Lamp Monitoring |
V/I/W/PW, Active & Reactive Power, Lamp Tempt., Cabinet Door Status, Air quality PM2.5, Snow, Rain, Fogs etc. |
|
Power Metering |
Reporting & Analysis |
|
GPRS Warning |
Lamp Failure,Over Temperature/Voltage, Wires Stolen, GPS location the Stealing-electricity on google map. |
|
Statistical Analysis |
Luminance Ration, Alarm Statistics, Power Saving Ration, Voltage/Current Fluctuate, Environment Monitor |
|
Protection |
Automatic Shut down when Over Tempt. ; Location Stealing & Automatic Calculation of Power Stealing, Wire Stealing Alarm & Location, Decreasing Current Impact & Extend Lifetime. |
|
Asset Management |
Lower Budget can choose our Asset Managing System |
|
Video Monitoring |
CCTV Camera for safer city (option) |
|
EV Charging |
Option |
|
Insulationwithstand voltage |
L/N-PE |
1.5KV |
L/N-485/DIM |
3.5KV |
|
Surge Protect(L-N L-PE N-PE) |
±8KV |
|
StaticElectricity |
±8KV |
|
Operating Temperature |
-25℃~+60℃ |
|
Storage andWorkingHumidity |
≤85% |
|
IP Rating |
IP54 |
|
Dimensions |
155x110*110mm (L/W/H) |
|
Certifications |
CE,ROHS |
III: FUNCTIONS
1.Terminals Description
NO. |
MARKS |
Function Description |
01 |
IA+ |
APhase Current Sampling Interface + |
02 |
IA- |
APhase Current Sampling Interface - |
03 |
IB+ |
BPhase Current Sampling Interface+ |
04 |
IB- |
BPhase Current Sampling Interface- |
05 |
IC+ |
CPhase Current Sampling Interface+ |
06 |
IC- |
CPhase Current Sampling Interface- |
07 |
NC |
Empty |
08 |
UN |
Power supplyNLine |
09 |
UC |
CommunicationCouplingCPhase |
10 |
UB |
CommunicationCouplingBPhase |
11 |
UA |
Power supply/CommunicationCouplingAPhase |
12 |
RA1 |
Power Supply Control Port --In |
13 |
RA2 |
Power Supply ControlPort --In |
14 |
RXD |
RS232Receiving Port |
15 |
TXD |
RS232Sending Port |
16 |
CGND |
RS232Common Port |
17 |
COM |
Electricenergypulse commonPort |
18 |
W |
Active energy pulse output |
19 |
Var |
Reactive energy pulse output |
20 |
GND |
Power Supply StatusDetect Port - Common |
21 |
IN1 |
Power Supply Status/Cabinet DoorDetect Port - 1 |
22 |
IN2 |
Power Supply Status/Cabinet Door Detect Port - 2 |
23 |
485B2 |
RS485Communication Port2 B |
24 |
485A2 |
RS485Communication Port2 A |
25 |
485B1 |
RS485Communication Port1 B |
26 |
485A1 |
RS485Communication Port1 A |